CV Profile No.108624

Experience in the following industries :

• Industry, production, manufacturing and other
• Mechanical equipment, machines
• Metallurgy, steel industry

Professional experience

• NDT INSPECTOR
• NDT INSPECTION SOLUTIONS P/L
• 01.2012 - 05.2023
• Trainee Inspector January 2012- May 2014 / NDT Inspection Solutions P/L Technical Inspector January 2014 – February 2016 Technical Signatory (ISO 17020) March 2016 – May 2020 • Carrying out Nondestructive examination, statutory inspection and pressure tests on pressure vessels and boilers. • Visual inspection of welds (high pressure and general welds) • Statutory inspection of lifting equipment. • Report and work instruction writing • Condition monitoring of machines in power plants, sugar plants, processing industries and mines equipment. (Cone crushers, ball mill gears, mill rolls gears and turbine blades. • Monitoring welding repairs on boilers (water tube and fire tube boilers). • Supervision of junior inspectors.

• Welding NDT Specialist
• Zimbabwe Power Company
• Since 06.2020
• o The roles are divided into 3 main phases; Before, During and After welding. Duties Before Welding ▪ Verify that the material is - In accordance with drawing/WPS - Identified and traced to a test certificate ▪ in suitable condition (free from damage and contamination) ▪ WPS is approved and available to welders (and inspectors). ▪ Weld preparations are in accordance with WPS (and / or drawings). ▪ Identification of welder’s qualifications for each WPS to be used and all welder qualification certificates are valid. ▪ Welding consumables to be used are - as specified by WPS - stored/controlled as specified by the QC procedure. ▪ Joint fit-ups are in accordance with WPS/drawing. • Duties During Welding ▪ Inter-pass temperature maximum temperature is in accordance with WPS. ▪ Welding consumables are in accordance with the WPS and being controlled as the procedure. ▪ Welding parameters for example; current, voltage, travel speed are in accordance with WPS. • Duties After Welding ▪ Ensure weld appearance is suitable for all NDT (profile and cleanliness) and visually inspect welds in accordance with Code. ▪ Check to ensure the dimensions are in accordance with drawing ▪ Ensure all NDT is complete and reports are available for records. ▪ Ensure all reports/ records are completed and collated as required.